Garage Door Cable Repair
Your garage door cables work with the springs to safely lift and lower 150-400 pounds of door weight. When cables fray, stretch, or snap, the door becomes unpredictable and dangerous.
We provide expert cable repair using aircraft-grade galvanized steel cables that will outlast your springs. Most repairs completed in under an hour.
Swift Resolution
Most cable repairs completed in under an hour. We arrive with cables for all door sizes in stock.
Safety Priority
We secure the door before any work begins. Your family's safety is never compromised.
Long-Lasting Cables
We use aircraft-grade galvanized steel cables rated for the life of your door.
Understanding Your Cable System
Knowing how cables work helps you understand why proper repair is so important:
Lift Cables
Connect to the bottom of the door and wind around drums at the top. They work with the springs to lift and lower the door.
Safety Cables
Run through the center of extension springs. If a spring breaks, the safety cable contains it to prevent injury.
Cable Drums
Mounted on the torsion shaft, these grooved wheels guide the cables as they wind and unwind.
Bottom Brackets
Secure the cables to the door panels. These are under extreme tension and require professional handling.
Signs of Cable Problems
If you notice any of these issues, stop using the door and call us immediately:
Door hangs at an angle
One cable has likely broken or come off the drum, causing uneven lifting.
Visible fraying on cables
Cables are wearing and will soon fail. Replacement now prevents emergency later.
Loud snapping sound
A cable just broke. Do not operate the door — call us immediately.
Door won't lift evenly
Cable may be off the drum or tangled. Continuing to use it causes more damage.
Cables appear loose or slack
Spring may have broken, or cables have stretched and need replacement.
Door slams shut unexpectedly
Dangerous condition — cable or spring failure prevents controlled descent.
What Causes Cable Failure?
Understanding the cause helps prevent future problems:
Normal Wear
Cables flex thousands of times over their lifespan. Eventually, the wires fray and weaken.
Rust and Corrosion
Moisture causes cables to rust from the inside out, weakening them before you see visible damage.
Spring Failure
When a spring breaks, the sudden release can damage cables or cause them to jump off the drums.
Pulley Wear
Worn pulleys with rough edges act like cheese graters, slowly cutting through cable strands.
Improper Installation
Cables installed too loose or too tight wear unevenly and fail prematurely.
Door Obstruction
Hitting an object while closing can jerk cables off the drums or cause them to snap.
Our Cable Repair Process
1. Safety First
We secure the door in place using locking pliers or C-clamps before touching any hardware.
2. Full Assessment
We inspect cables, drums, pulleys, and springs to identify all issues — not just the obvious one.
3. Release Tension
We carefully release spring tension using proper winding bars and safety procedures.
4. Cable Replacement
We always replace cables in pairs. Mixing old and new cables causes uneven wear and premature failure.
5. Hardware Check
We inspect and replace drums, pulleys, or brackets if they show wear or damage.
6. Tension & Test
We restore spring tension, test door balance, and verify smooth operation before leaving.
Cable Options
We carry multiple cable types to match your needs and budget:
Standard Galvanized
Most common type. Zinc coating provides basic rust protection. Good for 7-10 years in normal conditions.
Aircraft Cable
7x19 strand construction for maximum flexibility and strength. Preferred choice for most applications.
Coated Cables
Vinyl or nylon coating for extra corrosion protection. Ideal for humid garages or coastal areas.
Stainless Steel
Maximum corrosion resistance. Premium option for harsh environments or when appearance matters.